ANENG Digital Clamp Meter AC/DC Current Clamp True-RMS Multimeter Auto-Ranging Multi Tester with Amp Volt Ohm Resistance Capacitance Continuity Diode Temperature Frequency NCV Tests for Automotive Ele

ANENG clamp-on multimeter gives accurate reading on AC and DC current measurement, AC/DC voltage, resistance and more tests. It features loud audible beep for NCV and live line detection, 1.1-inch jaw opening, auto-ranging, true-RMS, 15-minute auto-off, data hold, flashlight, and more. 

Features:
MULTI TESTER: Measures AC/DC current, AC/DC voltage, non-contact AC voltage (NCV) detection, live/zero line detection, resistance, capacitance, continuity, diode, temperature, and frequency.
LOUD BEEP: NCV sensor and live/zero line detector send out audible and visual alarm once AC voltage detected.
PRECISION MULTIMETER: Give an accurate reading on home appliances, cars, electronics, HVAC and more.
WIDE JAW OPENING: Up to 1.1 inches(28mm) jaw opening is wide enough to clamp on wire without disturbing circuit.
EASY TO USE: Offers you with auto-ranging and manual ranging mode, extremely simple to use.
SAFE AND RELIABLE: Provided with overload protection and 1000V, 10A test leads, safe and reliable to use.
AUTO-OFF: Automatically shut down if no operation in 15 minutes, and beep when it shut-off.
MORE FUNCTIONS: Features data hold, flashlight, Celsius/Fahrenheit degree, low battery indicator and more.

Note:
*MUST read the user manual carefully before use for safety.
*Batteries not included.
*DC clamp meter will have legacy data, need to clear before each measurement.

Parameters:
Max. Display: 6000 counts
Auto-ranging: Yes
True-RMS: Yes

Accuracy/Range	6000counts	Resolution
DC voltage / AC voltage
DC/AC6V	±（0.5%+3）	0.001V
DC/AC60V		0.01V
DC/700V		0.1V
AC500V	±（0.8%+10）	1V
Resistance
600Ω	±（0.8%+5）	0.1Ω
6kΩ	±（0.8%+3）	1Ω
60kΩ		10Ω
600kΩ		100Ω
6MΩ		1kΩ
60MΩ	±（2.5%+3）	10kΩ
Continuity/Diode
“----”	Diode forward voltage drop	Forward DC current is about 1mA, open circuit voltage is about 3V
	The buzzer sounds long and the resistance of the test is less than (50±20) Ω.	Open circuit voltage is about 0.4V, press "power" for two-speed function switching
Capacitance
10nF	±（3.5%+20）	10pF
100nF		100pF
1uF		1nF
10uF		10nF
100uF		100nF
1mF		1uF
10mF		10uF
60mF	±（5%+3）	100uF
AC/DC Current
60A	±（2.5%+30）	0.01A
600A		0.1A
Temperature
(-20-1000 )℃	±（1.0%+5）＜400℃;   ±（1.5%+15）≥400℃	1℃
(0-1832 )℉	±（0.75%+5）＜750℉;   ±（1.5%+15）≥750℉	1℉
Frequency
10Hz	±（0.1%+3）	0.01Hz
100Hz		0.1Hz
1kHz		1Hz
10kHZ		10Hz
100kHz		100Hz
1MHz		1kHz
10MHz		10kHz