- Nomor item pedagang：E18585
Made of selected materials and with fine workmanship, this high quality spot welding machine features high wear resistance and long service life, mainly used for the welding of nickel sheets (0.1mm~0.15mm) of cylindrical battery, NI-MH battery, nickel cadmium battery and so on. Just have a try!
Features:
Made of selected metal and ABS materials, this portable spot welding tool set features wear resistance and long service life.
Adopting reliable cold pressing technology for fastening, 26cm long line and 10cm long main body of the pen holder, this 10AWG multistrand silicone wire features high temperature resistant & flexible & durable.
Made of pure copper, the φ2mm integrated electric welding pins feature fine conductivity and low contact resistance.
It is precisely controlled by single chip microcomputer program and then outputs through MOS tubes. There is no need to trigger the switch during use, which is labor-saving, easy to use and easy to carry.
Equipped with 3.7V~4.2V 5000mAh battery, the discharge rate can reach 65C, and the output capacity is about 300A, convenient charging & stable performance.
With the built-in charging control module, it supports charging the battery through the USB port.
Mainly used for the welding of nickel sheets (0.1mm~0.15mm) of cylindrical battery, NI-MH battery, nickel cadmium battery and so on.
Installation Steps & Precautions:
- To operate this product, you need to have considerable electrical knowledge. Do not short circuit or reverse the electrode.
- The copper lug of the black welding pen is connected to the upper surface of the circuit board with M5 screw. The copper lug of the red solder pen is connected to the positive pole of the battery (the back of the circuit board).
- After assembly, the battery should be fully charged through the USB cable. (In order to ensure the durability of the battery, we set a low charging current, and the charging process is about 4 hours. The red light is on during charging, and the green light turns on when full.)
- After the battery is connected, the circuit board is turned on by default and it will automatically turn off after a delay of about 10 minutes. Press the switch to turn on and select the welding current intensity.
- Each time the button is pressed, the following functions will be realized. (di - low current, didi - medium current, dididi - high current, shutdown)
Specifications:
Material: Metal
Color: Silver
Power Supply: 3.7V~4.2V 5000mAh rechargeable lithium battery
Recommended Thickness of Nickel Strip: 0.1mm~0.15mm
Item Size: Approx. 20*6*3cm / 7.87*2.36*1.18in
Package Size: Approx. 20.5*7*4cm / 8.07*2.76*1.57in
Package Weight: Approx. 360g / 12.7oz
Packing List:
1 * High Power Battery
1 * Circuit Board
2 * Welding Pen (With 10AWG Wire)
3 * Screw
2 * Insulated Heat Shrinkable Tube
1 * USB Cable
1 * Nickel Sheet
Features:
Made of selected metal and ABS materials, this portable spot welding tool set features wear resistance and long service life.
Adopting reliable cold pressing technology for fastening, 26cm long line and 10cm long main body of the pen holder, this 10AWG multistrand silicone wire features high temperature resistant & flexible & durable.
Made of pure copper, the φ2mm integrated electric welding pins feature fine conductivity and low contact resistance.
It is precisely controlled by single chip microcomputer program and then outputs through MOS tubes. There is no need to trigger the switch during use, which is labor-saving, easy to use and easy to carry.
Equipped with 3.7V~4.2V 5000mAh battery, the discharge rate can reach 65C, and the output capacity is about 300A, convenient charging & stable performance.
With the built-in charging control module, it supports charging the battery through the USB port.
Mainly used for the welding of nickel sheets (0.1mm~0.15mm) of cylindrical battery, NI-MH battery, nickel cadmium battery and so on.
Installation Steps & Precautions:
- To operate this product, you need to have considerable electrical knowledge. Do not short circuit or reverse the electrode.
- The copper lug of the black welding pen is connected to the upper surface of the circuit board with M5 screw. The copper lug of the red solder pen is connected to the positive pole of the battery (the back of the circuit board).
- After assembly, the battery should be fully charged through the USB cable. (In order to ensure the durability of the battery, we set a low charging current, and the charging process is about 4 hours. The red light is on during charging, and the green light turns on when full.)
- After the battery is connected, the circuit board is turned on by default and it will automatically turn off after a delay of about 10 minutes. Press the switch to turn on and select the welding current intensity.
- Each time the button is pressed, the following functions will be realized. (di - low current, didi - medium current, dididi - high current, shutdown)
Specifications:
Material: Metal
Color: Silver
Power Supply: 3.7V~4.2V 5000mAh rechargeable lithium battery
Recommended Thickness of Nickel Strip: 0.1mm~0.15mm
Item Size: Approx. 20*6*3cm / 7.87*2.36*1.18in
Package Size: Approx. 20.5*7*4cm / 8.07*2.76*1.57in
Package Weight: Approx. 360g / 12.7oz
Packing List:
1 * High Power Battery
1 * Circuit Board
2 * Welding Pen (With 10AWG Wire)
3 * Screw
2 * Insulated Heat Shrinkable Tube
1 * USB Cable
1 * Nickel Sheet
Review
100%komentar favorit
berbagi0Ginseng dan ratingEvaluasi produk